Submit Gain line level utility for VCV Rack and 4ms MetaModule
Hover to exploreTap to explore

GainGain

Tap to explore

Developed specifically for the 4ms MetaModule hardware, Gain brings incoming line-level sources up to a stronger, useful level before they enter your modular patch or the Submit Mixer System.

Built for the 4ms MetaModule to boost incoming line-level audio before it enters your patch.

Type
Line-level utility
Format
VCV Rack + MetaModule
License
Open source · GPL-3.0
Source
GitHub
Version
2.23.0
Changelog
GitHub

MetaModule utility

Line level,
more gain

Gain was developed for the 4ms MetaModule hardware, where an external line-level source can enter noticeably quieter than the modular signals around it. The module adds the amplification needed to make that source practical inside a patch.

Use Gain and the channel fader to establish a clear working level. The meter makes the result visible, while mute, compressor CV and the stereo effects loop keep the channel useful during performance.

For nerds and patient people

Why Gain exists

Gain came from connecting the small instruments I like to use to my MetaModule setup. A desktop synth or an iPad can arrive much quieter than the signals already inside a modular patch. I wanted to bring those sounds up to a useful level before they entered the Submit mixer system. That was the reason for building Gain. Its colour meter helps me match levels quickly, and the gentle protection stage catches accidental peaks. It works in VCV Rack too, but I made it with the instruments and apps around my hardware case in mind.

Inside Gain

Gain is a clean, fixed-purpose amplification stage for sources that arrive below a useful modular working level. Line-level devices, mobile hardware and some sample players can otherwise sound much quieter than signals generated inside VCV Rack or a MetaModule patch. Gain raises that source before it reaches the mixer, allowing the following stages to operate within a more appropriate range.

The colour meter follows the post-gain peak level: green shows a healthy range, amber warns that the signal is approaching the top of the nominal range and red indicates that the protection stage is working harder. Gain uses gentle soft clipping rather than a hard digital ceiling, but the cleanest setup is still to aim for green with only occasional amber. Gain is not a VCA; once the source is matched, Chain handles performance level, effects sends and the rest of the mix.

Signal flow

  1. Line-level input
  2. Clean amplification
  3. Colour meter
  4. Level matching
  5. Mixer-ready output

Signal flow

Lift it into the mix

  1. InputConnect the source

    Bring in a quiet stereo or line-level signal.

  2. GainFind a working level

    Raise the source towards green, allowing only occasional amber peaks for clean headroom.

  3. Fader and meterBalance visibly

    Set the mix level while monitoring its strength.

  4. FX and CVAdd movement

    Use shared effects or compressor CV from Squeeze.

  5. Chain outContinue the system

    Pass the stereo result to Shape, Master or another stage.

Tips

  1. Before ChainPlace Gain before Chain when using Loop or other sample players on the MetaModule.
  2. Match source levelsUse Gain to bring different sources to a consistent working level before mixing them.
  3. Not a VCAGain provides fixed level amplification and has no CV input for controlling its gain.

Patch ideas

Desktop synth input

Raise a quiet desktop synthesizer to a useful modular level before sending it into Chain.

iPad into MetaModule

Bring an iPad or mobile audio source up to level, watch the colour meter and continue into the mixer.

Balanced sample player

Place Gain after Loop when its playback level needs to match louder voices in the same patch.

Download & source

Use Gain in your setup

Submit Audio plugins are free to use in VCV Rack, a free modular synthesizer app for Mac, Windows and Linux. Install VCV Rack, then add the Submit Audio modules from the VCV Rack Library. To use them in Eurorack hardware, explore the 4ms MetaModule.

Support Submit Audio

If Gain brought your signal up, a small tip can lift the project too.

Every Submit Audio module is free and open source. If this one found a place in your patch, a small tip helps support future modules, testing and development.

Support Submit Audio on Ko-fi